Key takeaways
To pour draught beer from a tap, start with a clean glass held at about a 45-degree angle. Let the beer run down the inside, then gradually bring the glass upright as it fills to create a modest head. This technique helps you serve a balanced pint while avoiding excess foam. Below, we'll walk through the steps, explain why a head matters and share ways to make your pour smoother.
How to pour draught beer from a tap
Start with a clean glass
Before opening the tap, choose a clean glass with no grease or washing-up liquid residue. Make sure it has enough room for the beer and its head. Hold it securely by the base or lower half, rather than around the rim, so you can move it smoothly as it fills.
Hold the glass at an angle
Place the glass beneath the tap at about a 45-degree angle. Keep the spout clear of the glass and beer. This gives you room to guide the stream down the inside wall instead of letting it hit the bottom directly.
Pour down the side, then straighten
Open a standard draught tap fully in one smooth movement and let the beer flow steadily down the side of the glass. When it’s around halfway to two-thirds full, gradually bring the glass upright and guide the stream towards the centre. This helps form a head as the glass fills.
Finish with a modest head
Stop the pour before the beer reaches the rim, leaving room for the head, then close the tap cleanly. The ideal amount varies by beer, so aim for a balanced serve rather than a glass filled to the brim.
Tap controls differ: a standard pub tap is opened fully, while some home systems like Pinter let you adjust the flow. We'll talk about this soon!
Why a little head belongs in a good pour
That layer of foam, known as the head, is part of how draught beer looks, smells and feels. As bubbles rise and break, they release aromas above the glass, making it easier to pick up the beer’s character before you taste it. The head also shows that some carbonation has been released during the pour, which contributes to the beer’s texture and drinking experience.
The amount varies by beer and serving style; there isn’t one rule for every pint. Aim for a stable, modest head, rather than a glass of foam or no head at all.
How to pour beer from a tap with less foam
Avoid an icy glass
A frosted glass may seem like a good way to keep beer cold, but an icy surface can encourage excess foam. Use clean glassware that’s cool rather than frozen.
Keep the flow steady
With a standard draught tap, open it fully in one smooth movement. A partly open tap can disrupt the flow and create more foam. Keep the pour continuous instead of repeatedly stopping and starting.
Check the setup if it keeps foaming
If you’re pouring carefully and still getting too much foam, the cause may be beyond your technique. Beer that warms up, dirty lines or a problem with the dispensing system can all affect the pour. At a pub, ask the staff to check it. With a home system, follow its care instructions rather than adjusting parts by guesswork.
Using Pinter? Expert tips for the perfect draught pour
The Pinter’s tap lets you control the flow as you pour. A few small adjustments can help you get a smoother serve and the amount of head you prefer. Get tips from our experts.
Keep it cold and settled
Follow the conditioning time for your Fresh Press and keep the Pinter in the fridge. If you move it before pouring, let it settle for at least 30 minutes. This gives the beer time to stabilise after being moved.
Start with the glass at an angle
Hold a clean glass below the tap at about 45 degrees. Gently pull the handle forward to start the pour, letting the beer flow steadily into the glass.
Adjust the flow as you pour
Pull the handle farther forward to increase the flow. Start gently and adjust it as needed to keep the pour controlled. As the glass fills, bring it upright to form the head you want. These small adjustments help you get a smooth serve while keeping the beer in the glass.
We recommend letting the Pinter settle for at least 30 minutes before pouring. This allows the beer to stabilise and helps reduce excess froth.
Pinter Team
Brew and tap fresh draught beer at home with Pinter
The Pinter brings brewing, conditioning and serving together in one reusable unit. Add the ingredients, let the beer brew, condition it in the fridge, then pour directly from the Pinter when it’s ready.
Brew with a Pinter Pack
Add the Fresh Press, yeast and water, then follow the instructions and timings for your brew. The Pinter app guides you through the process, which varies by the beer.
Condition in the fridge
Once brewing is complete, place the Pinter in the fridge to condition. This develops the beer and allows it to carbonate naturally. Follow the recommended conditioning time for your Fresh Press.
Tap and enjoy
When the beer is ready, serve it straight from the Pinter’s tap. There’s no need to transfer it into bottles or a separate keg. A Pinter makes up to 10 UK pints, ready to pour and share at home.
A better draught beer pour at home
A good draught pour starts with a clean glass, held at an angle so the beer runs down the side. As the glass fills, bring it upright to create a modest head and avoid overflow. A little foam belongs in the serve; a steady pour helps keep excess in check. Every tap works differently, so adapt the technique to the system in front of you.
With Pinter, the handle lets you adjust the flow as you pour. Keep your brew chilled, take your time and you’ll be ready to enjoy fresh draught beer at home whenever you fancy a pint.
Don't just pour, brew your own fresh draught beer
Make 10 pints of Fresh Beer at home, then pour straight from the Pinter.
SHOP PINTERDraught beer pouring FAQs
Is draught beer the same as beer on tap?+
In everyday usage, yes. Both describe beer dispensed through a tap, usually from a keg. “Draught” describes how it’s served, rather than a particular style.
What type of glass is best for draught beer?+
A pint glass suits many beers. Some styles are served in glasses with a particular shape to showcase their aroma, appearance or head.
Can you pour draught beer into a jug?+
Yes. Use a clean jug with enough room for the beer and its head, and serve it soon after pouring.
About the author
Charlie Howsego
Community Executive
As Pinter's Community Executive, Charlie loves nothing more than helping people discover the joy of brewing at home. Through his writing, he shares practical tips, brewing insights, and a genuine passion for fresh beer.
United States
United Kingdom