Pinter vs Kegerator: All-in-One Beer Machine or Just a Beer Fridge?

Both Pinter and a kegerator can put cold draught beer on tap at home. But that’s roughly where the similarity ends. A Pinter is an all-in-one home brewing system: you make the beer, let it ferment, condition it and pour it from the same system. A kegerator, on the other hand, is essentially a refrigerated beer dispenser. You buy or fill a keg, connect it to the draught setup, keep it cold and pour.

So the real Pinter vs kegerator question isn’t simply which gives you beer on tap. It’s whether you want to brew fresh beer at home or serve beer that has already been brewed and kegged.

That distinction affects everything from setup and space to maintenance, cost and what actually ends up in your glass.

Pinter vs Kegerator at a Glance

What is a Pinter?

Pinter is an all-in-one home brewing system designed to take you from ingredients to fresh draught beer without separate fermenters, bottles or kegs. Add water and brewing ingredients, then leave it to brew for around 4–7 days. After that, move the Pinter into the fridge for 3+ days of conditioning, where the beer develops and naturally carbonates using the CO₂ created during fermentation. Then tap it straight from the Pinter. That means there’s no bottling stage, no separate kegging and no external CO₂ cylinder to manage.

One system handles brewing, conditioning and pouring.

Once ready, your fresh beer can stay fresh in the chilled Pinter for up to 30 days, so there’s no need to rush through all 10 pints at once.

What is a Kegerator?

A kegerator is essentially a refrigerator built or converted to hold and dispense a keg of finished beer. Unlike Pinter, it doesn’t brew or ferment the beer. Its job starts once the beer is already in a keg.

A typical kegerator setup includes:

The coupler connects to the keg valve, while the CO₂ cylinder and regulator provide the pressure needed to push beer through the beer line and out of the tap. The refrigeration system keeps the keg and beer line cold enough for consistent draught serving. So, while a kegerator is a very capable home draught beer dispenser, the brewing itself happens somewhere else.

The Biggest Difference: Pinter Makes the Beer

This is the part that separates Pinter from a kegerator most clearly. With Pinter, the beer is actually made inside the system. Add Fresh Press, Brewing Yeast and water, then let fermentation happen in the Pinter itself. The Brewing Dock collects spent yeast during the process, after which the main vessel moves into the fridge for conditioning. Once it is ready, you tap and pour directly from the same system.

Fresh Press + yeast + water → fermentation → conditioning → tap.

A kegerator starts much later in the journey. It takes finished beer in a keg and keeps it cold and ready to dispense. If you are a home brewer using a kegerator, you would typically need to:
- Brew the beer separately.
- Ferment it in separate brewing equipment.
- Transfer it into a keg.
- Carbonate and connect the keg.
- Place it inside the kegerator.
- Dispense it through the tap.

Or, of course, you can simply buy a commercial keg.

That is the real distinction: Pinter is brew-to-tap. A kegerator is keg-to-glass.

Setup: Which is Easier to Get Pouring?

Setting up a Pinter

Pinter keeps the setup deliberately simple. The flow is straightforward:

There’s no separate keg to fill, no external gas cylinder, no keg coupler and no traditional draught-line setup to build around it. Pinter itself requires no extra brewing equipment or electricity, and the whole process happens in one compact reusable system.

Setting up a kegerator

A kegerator takes a little more assembly because you’re setting up a complete draught beer system. Depending on the model and keg, you may need to:

That last part matters. A well-balanced system gives you a consistent pour; if pressure, temperature or line resistance are off, you can end up with too much foam or flat beer. Once everything is connected and dialled in, a kegerator is simple to use day to day. However, getting there involves more hardware than Pinter.

Pinter vs Kegerator: Beer Choice

What can you drink with a Pinter?

Quite a lot, actually. Our Fresh Beer range spans everything from Lagers and Pale Ales to IPAs, Stouts and Cider, with brewery collaborations and limited releases mixed in too.

Some of the most loved options include Lagunitas Super Cluster Remixed, Great Lakes Burning River Remixed and Hopewell West Coast Lager, so you can move from crisp and easy-drinking to big, hoppy or dark without changing your setup.

The difference is that you’re not just choosing what to pour. You’re choosing what to brew next.

What can you put in a kegerator?

A kegerator gives you broader access to commercial beer, provided you can source the right keg and it fits your system.
That makes it a strong choice if:

So, on sheer commercial keg choice, a kegerator has the edge. If you want to brew different styles of fresh beer yourself, Pinter should be your obvious choice.

Freshness: Brewing Fresh vs Keeping a Keg Cold

Freshness is one of the clearest differences between Pinter and a kegerator. With Pinter, you brew the beer yourself, condition it in the fridge and tap it from the same vessel. There is no bottling, separate kegging or transfer stage in between. That means your fresh beer is made close to the point of drinking, then stays chilled and ready to pour.

A kegerator starts with beer that has already been brewed and kegged elsewhere. Its job is to refrigerate that finished beer and dispense it on tap.

With Pinter:

Our fresh beer can stay fresh for up to 30 days when kept at the correct temperature. So if freshness matters, Pinter gives you something a kegerator cannot: the ability to make the beer fresh in the first place.

Space: Which One Actually Fits at Home?

If floor space is already spoken for, this comparison gets easier. A Pinter is compact enough to brew outside the fridge, then move into a standard household fridge for conditioning and tapping.

The Pinter 3 measures 35cm × 23cm × 24cm, and we estimate it fits into around 90% of standard UK fridges. The Brewing Dock comes off before conditioning, so only the Pinter itself needs fridge space.

A freestanding kegerator needs a permanent home. Depending on the model, that can mean:

Some units are effectively small beer fridges in their own right. So if you want draught beer at home without giving up a chunk of your kitchen, utility room or garage, Pinter is the much easier fit.

Pinter vs Kegerator Maintenance

Both systems need cleaning if you want good beer. The difference is how much kit you have to look after.

Cleaning a Pinter

With Pinter, cleaning happens between brews and stays fairly contained because there is no long external draught-line network to maintain. After a brew, clean the vessel and removable parts, including the Active Pour Tap, Main Cap and Brewing Dock, then run the purification cycle before starting the next batch. For a deeper clean, we recommend warm soapy water with a soft sponge, followed by an extended Purifier cycle.

The important bit is simple: anything that touches the beer needs to be properly cleaned and purified before the next brew. Read the guidelines straight from our experts.

Cleaning a kegerator

A kegerator has more separate beer-contact components, including lines, faucets and couplers, so maintenance is more involved. The Brewers Association recommends cleaning draught beer lines at least every 14 days, with faucets disassembled and cleaned at each service and couplers cleaned regularly too.

That doesn’t make a kegerator difficult to own, but it does mean more parts, more cleaning steps and a regular maintenance routine to keep the beer pouring as intended.

Carbonation: Do You Need a CO₂ Tank?

This is another place where Pinter keeps things much simpler. With Pinter, carbonation comes from the brewing process itself. During fermentation, the Brewing Yeast converts sugars into alcohol and CO₂. Then, during cold conditioning, that naturally produced CO₂ dissolves into the beer and builds the carbonation needed for the final pour. There is no external gas cylinder to buy, refill or connect.

A conventional kegerator usually works differently. To dispense beer from a keg, you typically need:

So if you want draught beer at home without managing a separate gas setup, Pinter removes one more piece of traditional kegging equipment from the equation.

Cost: Pinter vs Kegerator

Cost is where the difference becomes especially clear. A Pinter currently costs £99, and our Fresh Beer works out at around £1.79 per pint. You use your existing fridge for conditioning and tapping, with no separate keg, CO₂ cylinder, regulator, coupler or draught-line setup to buy.

If you plan to brew regularly, our beer subscription can make the upfront cost even easier, with current offers including a free Pinter when you sign up and keep Fresh Beer deliveries coming.

A kegerator carries a much bigger upfront cost. Current UK full-size systems commonly sit around £500–£650, with more advanced setups reaching £800–£1,000+. Then there can be additional costs for:

So with Pinter, you can start from £99 - or potentially get the machine included through a subscription offer - then brew Fresh Beer from £1.79 per pint without building a separate kegging and gas setup around it.

Which is Better for Parties?

Both can earn their place at a party. It really comes down to how you like to host.

Choose a kegerator if:

Choose a Pinter if:

What About Home Brewers?

This is where the comparison starts to become fairly one-sided. A home brewer can absolutely use a kegerator, but the kegerator only handles the final serving stage. You still need separate equipment to brew and ferment the beer before transferring it into a keg.

With Pinter, the whole process is built into one system:

You add Fresh Press, Brewing Yeast and water, let the beer ferment in the Pinter, move it into the fridge to condition, then pour straight from the tap. Pretty simple - and all in one place!

Pinter vs Kegerator: Pros and Cons

Pinter

Pros

Cons

Kegerator

Pros

Cons

Why Store Someone Else's Beer When You Can Make Your Own?

With Pinter, the beer starts with you. You can switch between lagers, IPAs, stouts, ciders and more, with fresh beer made at home and ready to pour when you are.

No separate kegging stage. No external CO₂ cylinder. No bar-sized setup. Just fresh beer, made by you, from one compact system.

Frequently asked questions

About the author

Charlie Howsego

Community Executive

As Pinter's Community Executive, Charlie loves nothing more than helping people discover the joy of brewing at home. Through his writing, he shares practical tips, brewing insights, and a genuine passion for fresh beer.